Hwashi Customized 38ov Double Station Fuel Tank Making Machine, Seam/Roll Weldingmachine for Tank

• Customization: Available
• Type: Continuous Seam Welder
• Welding Mode: Automatic TIG Welding
• Forming Time: 1s-10s Adjustable
• Welding Diameter: 50-800mm
• Input Power: 200kVA
• Usage: Seam Welding Machine
• Weight (Kg): 300kg
• Place of Origin: Guangdong,China
• Rated Input Current: 34000A
• Voltage: 220V50Hz
• Service Life: 8-10 Years
• Packing: Wooden Case
• Brand Name: Hwashi
• Warranty: 1year
• Power (Kw): 200
• Power: 200kw
• Trademark: hwashi
• Origin: China

Product Description

Product Description

HWASHI Customized 380V Double Station Fuel Tank Making Machine, Seam/Roll Welding Machine for Tank

Product description

Leakage proof double side circular seam welding machine is the evolution of spot welder. The equipment adopts medium frequency inverter technology, and the stable output current makes the welding current more stable. The welding current has no blank heating zone, the heat is concentrated and the heat affected zone is small. Balanced three-phase power grid, no pollution to the power grid, high power factor, energy saving, can store 101 welding specifications, programmable 3 section heating - preheating, welding, tempering welding programmer. Leakage proof double side circular seam welding machine uses touch screen to set welding current, welding time, welding speed, etc. The welding pressure is set through the pressure reducing valve.

 

Composition of Leakage proof double side circular seam welding machine

1. Power Source 2: Adopt medium frequency inverter welding source. Single power source is 250KVA. Duty cycle rate reaches 50%. The three-phase power supply is under rectifying through a special inverter and converted to1000Hz AC voltage and then be transmitted to a medium frequency transformer to be rectified so as to provide DC welding current. Compare with general AC pulse power supply, this kind of power source could be fast and precisely adjusted. Small impact to the power grid and lower requirement for the power grid compare with the single-phase welder of the same capacity.

2. Welding Wheel Driving System: design to use three-phase motor with transmission device to drive the upper wheel. The upper and lower welding wheel pressing device friction will drive the welding work piece to rotate. The rotating speed can be step less adjusted via frequency converter.

3. Electric Conduction System: Adopt the traditional silver tile conduction device. Large transmission friction and contact resistance. Weak conductivity and high maintenance cost. The conduction device adopts the Germany technology. Use the mercury as the conducting medium and special air locking as the connection for transmission shaft and base. Good transmission performance and conductivity. Effectively prevent the tedious maintenance of transmission methods. Welding wheel adopts the alloy copper product from Japan which is of high rigidity and good conductivity.

4. Welding Electrode: It adopts embedded electrode with superior conductive performance red copper on electric conduction position. It adopts high hardness Beryllium copper cobalt for the welding electrode. Welding wheel diameter can be designed according to welding position ranging from 200mm to 250mm.

Features of Leakage Proof Double Side Circular Seam Welding Machine

1.Double drive design, rotating conductive shaft with silver tile device. The mechanical failure caused by transmission friction can be effectively improved and the welding efficiency can be greatly improved. The equipped grinding wheel can be used to grind the welding wheel automatically, which can ensure the welding consistency. The welding process will not cause the breakdown of the welding piece due to the pause, and the welding speed does not change due to the wear of the welding wheel. The working process of high quality leakage proof circular seam welding machine is automatic, with high degree of automation and productivity. Suitable for high production operation.

2.Seam welding machine is to use the electrode wheel to pressurize the welding parts while the electrification, using the contact resistance between the electrodes to generate the joule heat instant melting metal under the pulse action to achieve the goal of seam welding. No need to add any solder, high efficiency and low cost. Easy to achieve automatic welding.

3.Welding speed does not change due to wear of the welding wheel. The working process of welding machine is automatic, with high degree of automation and productivity.

4.It is the most ideal equipment in the field of solar water heater, water tank, oil tank, pipe, gas storage tank, instrument case and so on.

 

Specification

Model	WL-FS-75K	WL-FS-100	WL-FS-125	WL-FS-160	WL-FS-200	WL-FS-250
Rated Capacity KVA	75	100	125	160	200	250
Voltage V	380*2	380*2	380*2	380*2	380*2	380*2
Duty Cycle Rate%	50	50	50	50	50	50
No Load Voltage V	1.08-7.02	1.12-7.38	1.26-8	1.3-8.5	2.2-9.0	1.3-9.7
Max. Welding Thickness mm	1.2+1.2	1.5+1.5	1.8+1.8	2+2	2.5+2.5	2.5+3
Upper Wheel Stroke mm	20-80	20-80	30-100	30-100	30-100	30-100
Welding Speed m/min	0.6-4	0.5-3.2	0.5-2.8	0.5-1.5	0.5-1.2	0.5-1.2
Max. Pressure KN	6.3	6.3	8.6	8.6	8.6	8.6
Compressed Air Mpa	0.5	0.5	0.6	0.6	0.6	0.6
Cooling Water Consumption L/h	820	960	1080	1080	1080	1080

Application and samples

Product Application Leakage proof double side circular seam welding machine is applicable to welding of fuel tank, kitchen sink, shock absorber, etc.

 

We can provide customized service for you. Our engineers will discuss the specific welding requirement with you and come out with the suitable technical proposal based on your samples or drawings.

Factory & Certificate

Packing & Delivery

Service Team & feedback

Professional Team

Over the years, Hwashi has cultivated a large number of talented, dedicated and innovative Hwashi people. We have a professional team of experts with rich experience in electrical engineering, mechanical design and welding technology.

 

 

Since its establishment 22 years ago, hwashi technology has traveled to all corners of the world, participated in more than 100 exhibitions and served more than 8,000 customers

FAQ

Q1: What is the price of your machine? Answer: our machines are customized for your requirements. If you want to get the appropriate price, please provide us the following information. * The material and thickness of your product * The minimum and maximum size of your product * The welding position of your products * The automation level that you want to achieve * It would be better if you can provide us the detailed product drawings so our engineer can come out with the suitable technical proposal and price for you.
Q2: What is the warranty period of your machine? Answer: our standard warranty period is one year after shipment. If you want to extend the warranty period, there will be extra cost.
Q3: What if my machine damaged doing the warranty period? Answer: firstly, our engineer will help you to diagnose the problem via online guidance. if any parts damaged during the warranty period, we will send the parts to you for replacement free of charge. If you can not fix he problem by replacement of the new parts, we will send engineer to your factory to help fixing the machine.
Q4: What is the delivery time of your machine? Answer: it depends on the complexity of your machine. Most of our standard machine we got in stock, then we can shape the machine with the seven days after receiving your payment. If you need the Customized machine, normally it would take about 30-90 days to complete the machine.
Q5: Can we send the sample to you for welding test? Answer: yes. You can send us the samples for welding test and we will send you the pictures and videos after the testing. If you need, we can also send the samples back to your country so you can check the welding quality by yourself before ordering the machine.
Q6: Can you provide us the machine drawings and technical proposal? Answer: yes. After receiving your detailed requirement and product drawings, our engineer will come out with the suitable Technical proposal with the basic machine concept drawings to you. Be size after you placing the order we will send you the more detailed design drawings of the machine to you for confirmation. Only after you confirming the drawings then we will start the manufacturing process.
Q7: What's your payment terms? Answer: we can accept the following payment terms: T/T, L/C, Western Union, ****** trade assurance. (we prefer you to choose the ****** trade assurance order. If you are not satisfied with the machine that you order, or we delay the shipping time, then you can apply the complaint on . )
Q8: How can we install the machine? Answer: for some simple machines we will provide you the english operation manual, the operation video and also we will provide you the online guidance and training to your engineer so you can set up the machine easily. For some complicated machines, we will send engineer to your country to help installation and training. But there will be extra cost for Engineer, including the salary, visa cost, round-trip ticket cost, and accommodation fee will be covered by the buyer.